| Body Material | 316 Stainless Steel, Monel |
|---|---|
| Seat Material | PCTFE, PTFE |
| Seal Material | Graphite-filled PTFE/Elgiloy® |
| Washer Material | PTFE |
| Delta Back-up Ring Material | PTFE |
| O-ring Material | FKM(Viton®) |
| Stem Seal Type | Delta Stem Seal, Energized PTFE seal |
| A_in | 2.40, 2.96, 3.06, 3.08, 3.11, 3.12, 3.19, 3.45 |
| A_mm | 61.0, 75.2, 77.7, 78.2, 79.0, 79.3, 81.0, 87.6 |
| B_in | 1.46, 1.72, 1.78, 1.82, 1.84, 1.89, 1.96 |
| B_mm | 37.1, 43.7, 45.2, 46.2, 46.7, 48, 49.8 |
| C_in | 0.94, 1.24, 1.28, 1.29, 1.30, 1.49 |
| C_mm | |
| End Fitting | Gasketed, Welded |
| Proof Pressure Safety Factor | 2:1 |
| Cv Factor | 0.23, 0.56, 0.80, 1.14, 1.44 |
| Maximum Operating Pressure | 6000 psig at 70° F (414 Bar at 21° C), 3000 psig at 70° F (207 Bar at 21° C) |
| Orifice_in | 0.093, 0.187, 0.156, 0.234, 0.25 |
| Orifice_mm | 2.36, 3.96, 4.75, 5.94, 6.35 |
| Connections - Inlet | 1/4" Gyrolok, 1/8" Gyrolok, 1/2" Gyrolok, 1/4" NPT Female, 10 mm Gyrolok, 3/8" Gyrolok, 6 mm Gyrolok, 8 mm Gyrolok |
| Connections - Outlet | 1/4" Gyrolok, 1/8" Gyrolok, 1/2" Gyrolok, 1/4" NPT Female, 10 mm Gyrolok, 3/8" Gyrolok, 6 mm Gyrolok, 8 mm Gyrolok |
| Actuation Method | Lever Handle, Oval Handle |
| Packaging Material | PTFE, PTFE & FKM (Viton®), PTFE Graphite Filled PTFE |
| Burst Pressure Safety Factor | 4:1 |
| Cycle Life_cycles | 100000, 50000 |
| Denotes Live-Load Seats | Bi-directional Flow, Live Loaded Seat (Uni-directional Flow) |
High Cycle, Zero Leak Ball Valves – D, DL, T, TL Series
For remote actuation , factory-assembled Hoke Space Saver™ Actuators are available. D, DL, T and TL series valves can be ordered with welded end fittings to prevent accidental disassembly or with gasketed end fittings, if valve rebuild becomes necessary.
Hoke’s DL/TL ball valves are uni-directional, high cycle valves that exceed 100,000 cycles with zero seat leakage. Depending on seat, seal, and washer material selected.|For remote actuation , factory-assembled Hoke Space Saver™ Actuators are available. D, DL, T and TL series valves can be ordered with welded end fittings to prevent accidental disassembly or with gasketed end fittings, if valve rebuild becomes necessary.
In applications where bi-directional flow is required, Hoke D and T series valves exceed 50,000 cycles. Hoke ball valves can be ordered in brass, 316 stainless steel or Monel® materials with a manual handle as standard.
Scarica il PDF tecnico
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Per poter scaricare i PDF deve essere registrato o fare login al nostro catalogo
Hoke, Gyrolok
